Connect with us

Buyer Guide

B17 Paint Stripper: All You Need to Know About



Removing paint from wood is not easier said than done, but if you get the right paint stripper or strong coat remover, then it can be easy to remove. For example, the b17 stripper. Wondering what b17 is, and how to use it? Below is a detailed guide about the uses, benefits, and drawbacks of using a B17 paint stripper for wood. Read till the end.

What is B17 Paint Stripper?

B17 is an industrial liquid chemical stripper with a high concentration of methylene chloride that removes sturdy powder coating within less than 20 minutes. It is one of the best paint strippers in the market with never ending demand.

It can be applied to numerous hard surfaces including;

  • Metals
  • Plastics
  • Powder coating

To use it, you must apply a methylene chloride solution.

As a coat-removing chemical, B17 has been developed to remove tough automotive parts and is the leading stripper in the industry. It uses a proprietary formulation of Methylene Chloride with a mixture of activators and evaporation inhibitors to provide an effective strip. Unlike other paint strippers, B17 does not damage the substrate where it strips over

Uses & Benefits of B17 Paint Stripper for Wood

The b17 paint strippers are best to use in isolated areas, and it must be stored in a heavy gauge steel or HDPE tank. Temperatures should not exceed 104 degrees Fahrenheit. The product may also corrode heating systems, so it is important to follow all safety precautions.

B17 paint stripper for wood has several advantages over other wood strippers, such as;

  • It is a non-flammable, acidic liquid that retains its effectiveness even at higher temperatures.


  • B17 can be used from 35 to 100 degrees Fahrenheit without dilution


  • B17 also does not freeze, which limits its evaporation. The chemical can remove most types of coatings within minutes. Its efficiency can also be improved by agitating the tank while stripping.




Chemical strippers can be hazardous to your health. Caustics tend to cause skin irritation and can clog the respiratory system. For this reason, people often opt for non-abrasive strippers as they are more effective for many surfaces, and can remove multiple layers of industrial and architectural coatings.

How to use B17 Paint Stripper?

B17 paint stripper is an acidic solution that can be used to strip paint and other coatings. It has special ingredients that limit evaporation and provide stability to its formulation. Following are the careful steps of using a b17 paint stripper for wood;

  • Before stripping the paint, ensure the wood is properly prepared for the chemical. It is recommended to work in a well-ventilated area. Wear protective gear including eye and hand protection.


  • Once you prepare the surface for the paint stripper, test it with a scraper and leave it overnight or for the recommended time. If the paint does not come off, you may need to use another product.


  • After choosing the type of paint, then choose which paint stripper for wood to use. You can also experiment with different solutions to determine which will work best. A test patch will help you determine the right paint stripper for your wood and how to scrape it off.

B17 can be safely used at temperatures ranging from 35 to 100 degrees Fahrenheit. However, it should not be stored at temperatures above 104 degrees Fahrenheit. The reason is, B17 contains methylene chloride, which can break apart and release dangerous fumes. This can damage heating systems, so B17 must be stored outdoors.

If you use B17 regularly, it will remove most powder coats in just a few minutes. It has a high methylene chloride concentration and is designed for frequent use. In contrast, common paint strippers are great for occasional use. They come in gels and aerosols and can be applied multiple times. Make sure they contain methylene chloride for accurate results.

Does B17 paint Stripper have a negative side as well? Below are the pros and cons of using a b17 paint stripper.

Pros & Cons of B17 Paint Stripper


Pros of B17 Stripper

B17 is a paint stripper that works best for stripping off powder coating. It has a high concentration of methylene chloride and can remove most types of coating in under 20 minutes.

You must dip the part in solution, check it after about five minutes, and then pull it out once the powder coating has melted. It can then be rinsed off with water and trisodium phosphate.

The product comes in a variety of sizes and types. Some of them are large, while others are smaller. The smallest B17 is about 23″ wide by 19″ deep by 15″ tall. Both models can be used on the same item. Both products have their pros and cons.

Cons of B17 Paint Stripper

The fumes it produces are toxic and can cause serious health issues. Using a product that contains methylene chloride can also be time-consuming.

Using paint strippers or removers to remove hard paint layers from wood surfaces may seem simple, but it takes many safety considerations before choosing the type of paint. Even if you have all the requirements, always follow the directions.

At Solvent Replacement, you will find durable, high-quality b17 paint strippers for wood. They are affordable, non-toxic, and environmentally friendly.

Continue Reading
Click to comment

Leave a Reply

Your email address will not be published. Required fields are marked *

Buyer Guide

How to Choose The Best Air Duct Cleaning Service in Norman



Having your air ducts cleaned can help keep your home safe and healthy. Dust and allergens can build up in your duct-work over time. Additionally, dust and microbes can flourish in a dirty duct-work. These contaminants can cause the air inside your home to become polluted. Not only that, but clogged duct-work can also reduce the efficiency of your HVAC system and increase your energy costs. When looking to hire an air duct cleaning service in Norman, Oklahoma, you should consider a few factors. We will discuss these factors one by one in this post.

How to Choose The Best Air Duct Cleaning Service in Norman

We are going to discuss how you select the best air duct cleaning service in Norman, Oklahoma, for your needs.

1.Figure Out The Cost of Air Duct Cleaning Service

You can start by evaluating how much the job will cost. An air duct cleaning service in Norman for your home may charge you somewhere between $250 and $500, but the price for larger homes or those with difficult-to-access air ducts may be more expensive. Also, if you have mold in your home, the work will likely cost even more.

2.Work Out The Cost of A Compressed Air Flush

If you live in a Norman, Oklahoma area home, you should have your air ducts cleaned regularly. Dirty ducts can harbor allergens and black mold, which are hazardous to your family. In addition, dirty ducts can be the source of pest infestations. Dirty ducts can also slow down the ventilation of your home’s air conditioning system. By hiring a professional air duct cleaning service in Norman, you can make sure that your ducts are free of all such hazards.

Air duct cleaning costs in Norman vary, depending on the number of ducts and the square footage of your home. A reputable service provider will charge between $500 and $750 for a single-story home. This includes sanitizing and deodorizing. Additional ducts may cost $5 to $10 per vent. The cost of a compressed air flush for air duct cleaning service in Norman, Oklahoma may be higher if you have mold inside your home.

3.Add The Cost of A HEPA Filter

If you suspect that your home has an infestation of mold, you should choose an air duct cleaning service that uses a HEPA filter. This will reduce the likelihood of the infestation returning. Depending on the size of your duct-work, a HEPA filter could cost anywhere from $350 to $1,000. However, the price is well worth the improved air quality.

4.The Cost of A Reme Halo device

The Reme Halo is a technology that can be inserted into your existing duct-work to kill bacteria, viruses, and mold. This innovative device can also help reduce odors and other airborne particles. It also features quick-release technology, which allows for a hassle-free installation and service. This device is capable of purifying air for up to 18,000 to 25,000 hours and can be installed in a variety of settings, including residential homes, restaurants, shops, and offices. It also reduces the amount of dust in your indoor air!

The REME HALO system is a great option for healthcare facilities. It is highly effective in killing common bacterial contaminants and other airborne allergens. These allergens can contaminate food and cause food waste. Even worse, airborne bacteria and mold spores can infect humans and cause diseases. Fortunately, the Reme Halo system is proven to eliminate 99+% of these harmful contaminants and keep medical facilities clean.

The Bottom Line

Working out the cost of air duct cleaning service & heater repair in Norman is important so you can compare quotes. There are many factors that determine the final price, including the cost of air duct cleaning service, the cost of a compressed air flush, the cost of a HEPA filter (if needed), as well as the cost of a Reme Halo device, if required. You will also have to keep in mind the size and number of vents, the type of duct-work, level of contamination, local labor costs and geographic location. Gapro Mechanical is offering the best air duct cleaning service in Norman.

Continue Reading

Buyer Guide

How to Choose the Right Industrial Surge Protector



Industrial surge protector are needed in many industrial settings to ensure the safe operation of equipment and systems. However, not all surge protectors are created equal, and an incompatible device can cause more damage than good depending on the electrical system. Therefore, finding a surge protector that can protect your equipment is crucial.

Surge protectors divert excess energy away from sensitive equipment by changing the direction of current flow. These devices can be either high-frequency feeder arresters or signal arresters. Some can protect microwaves, mobile base stations, satellite receivers, and DDN lines. Moreover, they protect workstations, servers, and interfaces. For optimum protection, you should opt for a 3rd-generation protector, and this model is more effective and offers enhanced safety and life-cycle.

In addition to surge suppression devices, industrial surge protection is beneficial for areas exposed to extreme weather conditions. Lightning strikes can damage electrical equipment and cause fires, which can be dangerous. Industrial surge protection devices can protect against lightning and other environmental factors that can affect the health and safety of your staff. Industrial surge protection devices have specific features that allow them to shunt damaging currents to the ground. The design of these devices ensures that you get the most effective protection for your equipment.

Some of these surge protectors also have a high discharge capacity. Depending on the type and size of the connected equipment, they can withstand a surge of up to six thousand volts and three thousand Amperes. Other types of surge protectors use multiple elements to prevent sudden voltage and current changes.

The best industrial surge protection device is based on the latest technology. These devices have built-in temperature fuses and circuit breakers to prevent overheating. These devices can also be fitted with LED lights. By doing this, they are easy to access and install. There’s no need to worry about damaging your equipment using outdated surge protectors.

If you’re a business owner, it’s important to protect your equipment from dangerous power fluctuations. An unprotected power system can lead to costly repairs and downtime. Lightning strikes can cause power surges, which can damage critical business equipment. Without an industrial surge protector, you may find yourself stuck with the bill for repairs.

An industrial surge protector should be UL listed for the type of application it’s designed for. UL listing means that it has passed stringent testing standards for safety. However, be aware that UL listing doesn’t necessarily reflect its intended use, so read the labels carefully. You can also check the product’s certifications to ensure that it meets the highest standards.

While an industrial surge protector isn’t the perfect solution for your business, it can be an excellent choice to safeguard your electrical infrastructure. These devices offer superior protection and support a variety of different applications. By comparing the features of industrial surge protection devices, you can choose one that works best for your needs.


Continue Reading

Buyer Guide

The Importance of an Industrial Surge Protector



An industrial surge protector is a device that can safely and reliably power all electronic equipment. A good industrial surge protector has a maximum energy rating of 400 joules and a 72-inch cord with integrated cable wrap. The device detects power spikes and suppresses them to avoid damage to sensitive equipment. Its metal housing and 72-inch cord provide ample length to reach electrical outlets.

A surge protector protects electronic equipment, electrical systems, and batteries from damage. It gradually breaks down dangerous interference energy to levels corresponding to the rated impulse voltage. Each stage of protection must work together. For example, a surge protector with multiple surge arresters will protect UPS batteries from damage. These surge arresters can reduce overall industrial maintenance costs and provide ROI in as little as six months. However, be aware of the dangers of using incompatible surge suppressors.

Power surges occur when a power switch makes a brief demand for power and upsets a steady flow of voltage. The surge disrupts the normal functioning of a building’s electrical system. If it is not protected, it can result in immediate damage. However, it can also cause damage over time and may take a few weeks or months to show its effects. Common sources of power surges include downed power lines, faulty wiring, and problems with utility company equipment. The system of power lines and transformers is complex and often causes uneven power flow, making surge protection essential.

An industrial surge protector is vital to the overall safety of any facility. Surges can damage equipment by spiking the voltage, resulting in fires, explosions, and even death. A surge suppressor will protect your facility from these risks and help ensure the integrity of your electrical equipment. A surge suppressor also reduces the risk of power surges due to lightning. Get it now from Zerodt.

A surge protector should have a UL listing label tested for safety. This means that it has passed a series of rigorous tests. This certification ensures the safety of employees and equipment. UL testing is a must for any industrial surge protection device. The UL test is also a good indication of a surge protective device’s robustness.

Another important factor to consider when selecting a surge protector is the type of technology. A surge protector may be MOV-based or non-MOV-based. MOV-based protectors can produce impressive response times. However, this does not mean these devices will be completely impervious to surges. Rather, they should be able to withstand many small surges and still perform their function.

The types of industrial surge protection devices available for industrial use are diverse and varied. For example, Eaton SP2 series surge protectors are designed for type I and II applications, and they feature a UV-resistant NEMA 4x enclosure and a range of 550 kV. Another type of surge protector is the 3EL series, and this type is extremely lightweight and requires minimal maintenance.

When purchasing an industrial surge protector, ensure it meets the UL 1449 standards. This is the minimum safety rating required by Underwriters Laboratories, and UL considers 330 volts to be the minimum clamping voltage for safe use. A surge protector’s UL rating should be checked yearly to ensure that it’s working properly.

Continue Reading